zelifcam

joined 1 year ago
[–] zelifcam@lemmy.world 4 points 3 days ago

I cannot do 60hz anymore. Once you go above that, there’s no going back. Just moving the mouse feels better.

[–] zelifcam@lemmy.world 46 points 1 week ago (3 children)

Well, I can tell you trying to use the Xbox controllers I have on Linux, with Bluetooth was a nightmare until their firmware was updated.

[–] zelifcam@lemmy.world 2 points 1 week ago* (last edited 1 week ago)

I have to admit, I’m a bit confused.

I have dns records already in my domain provider pointing to a tailscale ip

I want to know what I have to do to get minecraft.example.com to resolve interenally.

Since your domain resolves to an internal private Tailscale IP and your question is how to access using the domain, locally…. I feel like there’s an error in your architecture here. Wouldn’t any device that is on your Tailscale private network already have access using the domain name? If by “resolve internally” you mean hosts on your LAN, not connected to Tailscale scale? How would that be possible if it resolves to a Tailscale IP. If you have control of your DNS on your LAN, you could simply add an override and point it to the LAN address of the Minecraft server.

[–] zelifcam@lemmy.world 1 points 1 week ago (3 children)

it'd be nice to be able to use a domain instead.

If your looking to access it outside your LAN, you’re gonna want to open up the correct ports on your router’s firewall.

[–] zelifcam@lemmy.world 8 points 2 weeks ago (5 children)

How annoying is it to connect to VPN/use Tailscale

I think it’s very important to separate a random “VPN” solution to using Tailscale.

instead of being able to access the service directly?

Focusing on Tailscale. Who turns off Tailscale? It is “directly” connecting to your service or app or whatever. That’s the whole point.

[–] zelifcam@lemmy.world 5 points 2 weeks ago* (last edited 2 weeks ago)

I find Sync more responsive.

I like cranking the size of some text

I’m on iOS and Voyager has many customizations and the ability to change text sizes. I’ve never noticed any issues with responsiveness.

Is this another one of those “well I was on Android and used sync vs well I was iOS and used AlienBlue / Apollo ” comments? Perhaps androids Voyager not as good as the iOS version? I guess it depends on what OP is using for mobile.

[–] zelifcam@lemmy.world 3 points 2 weeks ago

Great album.

[–] zelifcam@lemmy.world 5 points 2 weeks ago* (last edited 2 weeks ago)

Apple is reportedly working on a new game-focused app int.. … social … achievements …

A launcher. Apple is building a game “launcher” with iOS integrated bits.

[–] zelifcam@lemmy.world 3 points 2 weeks ago

Nah. Like most things, “it depends”.

[–] zelifcam@lemmy.world 2 points 3 weeks ago* (last edited 3 weeks ago)

Link to photon UI?

Edit: Are you taking about this one?

https://github.com/Xyphyn/photon

3
submitted 2 months ago* (last edited 2 months ago) by zelifcam@lemmy.world to c/meshtastic@mander.xyz
 

I read through the Meshtastic firmware code and found the file variant.h for the Meshtastic-DIY-v1_1 build. Notice it’s not the DIY-v1. Instead v1_1. My understanding from that file is that I should be able to wire the following:

ESP32 WROOM-32 dev Pin,Core1262-868M Pin,Function

3V3,VCC,Power (3.3V)

GND,GND,Ground

18,SCK,SPI Clock

19,MISO,SPI Data In

23,MOSI,SPI Data Out

5,CS,SPI Chip Select

33,DIO1,LoRa IRQ

32,DIO2,LoRa BUSY

27,RESET,LoRa Reset

14,RXEN,RF switch RX control

13,TXEN,RF switch TX control

Unfortunately after building out the DIY_v1_1 firmware, wiring it up and flashing it I get thrown into a boot loop only after setting the region.

I will provide logs once I’m able to do so, just wanted to submit this while I had time. I’m curious if I was misunderstanding the compatibility with a Core1262-868M or if anyone has any tips. Thanks.

Update : I have it working

207
submitted 2 months ago* (last edited 2 months ago) by zelifcam@lemmy.world to c/mildlyinfuriating@lemmy.world
 

The most useless calendar widget is made by Apple. I constantly forget that someone’s birthday or something important is coming up later in the week.

Now I understand that you can set up alerts and you can set up reminders for stuff. I also understand that you can choose a different size widget. But depending on the size and the amount of events it’s possible it won’t even show you what’s going on the next day in the larger widget as well.

This is forced me to use third-party widgets to display calendar events for the week on my home screen. I hate it because I have no idea if it’s stealing my data.

Bonus Edit! The large widget fails to show you what’s happening today!

1
submitted 3 months ago* (last edited 3 months ago) by zelifcam@lemmy.world to c/gratefuldead@lemmy.world
 

 

I now have access to a 3D printer and a bit of time. I’d like to skip this dance of smart doorbells kinda working , kinda not with home assistant. Any DIY doorbell projects out there the community can recommend?

 

It feels like more Lemmy apps are going to make their way on to the app stores. With more apps, comes more people. More people, more API calls. How do we scale this server and hopefully all of the others to come, financially?

There are some REALLY interesting Podcast 2.0 features in the works. Especially using “value4value” and “boosting” as a way for listeners to tip their favorite podcasts and fund them directly. I wonder if somehow we can learn from it?

For those who do not know, hopefully these Podcasting 2.0 features will help podcasters continue to thrive in world where companies like Spotify and Amazon have decided to destroy our incredible open and free podcast networks by making “exclusives” and putting them behind paywalls that don’t follow the open standards.

I’d really love to integrate Podcasting 2.0 RSS and the fediverse. How cool would it be if every podcast episode just had its own place in the fediverse with a place to chat and it all worked together somehow automatically.

I dunno. Just a thought.

Here’s some info:

https://podnews.net/article/new-podcast-apps

https://blubrry.com/podcast-insider/2023/01/25/blubrry-releases-new-podcasting-2-0-integration-value4value/

view more: next ›