ilovededyoupiggy

I built a Ploopy mouse yesterday. All the buttons work, and for the most part it's fine. But the movement is on and off laggy. Sometimes it works great, even faster than what I had before, and then it just stalls or stutters and slows down for a several seconds. I've tried a couple different USB cables, I've taken it apart and tried to reseat everything, I took the optic piece off and tried to blow out any dust that may have been in there. But it's still on and off laggy. Happens in windows and Linux both.

This is only the second thing I've ever soldered, and I'm sure I did a pretty trash job of it. The board is mostly done but you have to solder the optical chip in at build time. Could that cause it to be laggy like that? I don't see any pins accidentally soldered together, there's separation between each soldered lead, though I definitely can't do the nice pretty little dots, they're ugly as hell.

They've provided instructions to build/update the firmware, could that help maybe?

Just wondering if there's any other ideas to help fix this? If I knew it was a legit bad board or something I could maybe go back to the seller and see about getting a replacement, but I'm afraid my soldering could be at fault in which case I don't want to make that his problem. So I'm hoping someone here may have an idea. I love the idea of this diy 3d printed mouse, just hoping it wasn't a $100 mistake.

Thanks in advance.

A story, in 19 titles.

cross-posted from: https://lemmy.world/post/12604942

Really was trying for more Bea than Arthur, got more Arthur than Bea. This is the closest the bingolator would give without violating some rule or another. It's a shitpost, whaddya want?

Seriously. The only time I listen to FM radio is when I take my wife's car to get an oil change. So maybe a total of twenty minutes driving time once every six months or so. Every single time, this song comes on. I don't get it. It was a one hit wonder from like 25 years ago. How is it still getting that much airplay?!

I bought this Christopher Ward C60 #tide earlier this year, and I'm loving it! I purchased it on the bracelet, and also ordered the matching #tide strap.

Fit and finish is fantastic. I absolutely love their quick release bracelet! It's amazing! I really wish more watch bracelets had something like this. My other daily driver is a Speedy, and I would actually wear it on a bracelet more often instead of sticking to NATOs and other quick release straps if it wasn't such a pain to switch. This watch feels great on the wrist. At 42mm, it's arguably just a tiny bit too big for my 6.75" wrist, but it feels perfect to me. At least it's not one of those ridiculous giant Invictas, right?

The highlight of this watch is the wave pattern on the transparent blue dial. The waves are a little bit lumed, so even in the dark, it's got character. I'll be honest, though, I'm a bit underwhelmed by it. Compare my photo to the one on their website. When I took my photo, I'd been out in my backyard for an hour or two "watching the smoker," (read: laying in a hammock, scrolling Lemmy, occasionally glancing at temps) and then went straight to the completely black garage. So it would have been plenty charged up. You can see the waves, for sure, and I still think it's a cool effect. But it's not anywhere near as bright as their marketing photo suggests. But the wave pattern and the semi-transparent dial still look great even in daylight, so it's not a super big disappointment.

I'm not a scuba diver, but I've taken it swimming in the ocean and a lake or two, and it keeps on ticking. It's got 600m water resistance, which is more than enough for anything I ever plan on doing with it. But there's an awful lot of watches that cost many multiples of this one with only 150, 200, 300 meter ratings, and everyone knows how "accurate" those are anyway. So this one having double the usual depth rating was still nice. I don't need it, I don't really care, but the big number makes me feel better. I bought this to be my GADA watch, so having double the usual depth rating was reassuring, even if the "DA" in "GADA" won't ever mean diving to anywhere near 600 meters for me. It means I don't have to care. That's what I'm going for.

I can't really comment on it's accuracy, because i don't wear it every single day and I don't keep it wound, but when it's on for a few days in a row I don't have to change anything. It's absolutely good enough for me, but I'm not you. It's a Sellita SW200 movement, I imagine if you're subscribed here, you probably don't really need me to elaborate.

This was my first experience dealing with international shipping, and it went smoothly. I got an email from DHL when the watch arrived in the States, paid something like $90 for customs, and the watch was at my door maybe 4-5 days later.

Christopher Ward's customer service is great, too. A couple months after I bought it, I somehow managed to lose one of the keepers from the strap, slipped off somehow I guess, lost to the fifth dimension. I sent them an email asking if it was possible to get a replacement keeper without buying a whole new strap, and they sent me one. Totally my fault but they fixed it anyway. Go them!

All in all, I'm totally happy with the purchase. It's one of my two dailies (for now...), and it will be in the rotation for a good long while. It's great looking, great feeling, keeps good time, goes swimming, and it also glows in the dark a tiny bit more than most other watches. I'm just a rando on Lemmy, but if you're coming here for opinions, you can't go wrong with this one!

This awesome new plate was my Father's Day gift from my daughter. It's fantastic, and huge, and it'll definitely be serving steaks tonight, and whole-ass briskets in the future. I just wanted to show it off to the dads here. All of a sudden I kinda feel a little sorry for all the dads that don't have their own custom daughter-painted grill plates. Hopefully you get one soon!

I'm glad there's a r/daddit equivalent on the fediverse. That was one of the most recent subs I'd found and joined before spez went crazy, glad some of you boys have migrated over here. Cheers, gents!

Edit: I've been schooled in the comments, this is no longer a thing, they've relented and allowed more control over the censor list. But hey, it's kinda funny still, so, feel free to keep reading if you like...

Original post follows.

Coming here from the Great #RedditMigration. When all of the alternatives were being discussed, one thing I noticed was that Lemmy seems to have one single global slur list that's literally hard-coded into the software. Your only option (as a server admin) is to either enable or disable it, but the words it's going to block are permanent and unchangeable unless you can talk the devs into updating the regex for the next release.

And I checked out some of their GitHub issues, and the devs seem almost militantly defensive of this. Like, they are not entertaining any suggestions at all to make it editable. Their actual solution is, if you don't like it, fork the repo and change it your own damn self, but we're not touching it, go piss up a rope. Don't mind one of the words they don't like? Too bad. English word is perfectly innocuous in your language? Piss off. Want to block the equivalent Djiboutian words? Believe it or not, go to hell.

Seems like such a weird hill to die on. And this is concerning as the lemmyverse is just taking off. This just seems like such an easy and obvious thing to make configurable for all kinds of reasons, and they're just closing down tickets. Not even a "don't have time right now but we'll put it in the backlog and get there soon". Just, nope.

So anyways. I dunno where I'm going with this really. I'm not in a position to really do anything about it. So this is just a rant I guess. But if the main devs of this thing we're all migrating to are this... I dunno, arrogant? Opinionated?... already, then what's gonna happen later when there are actual real issues that need addressed? We're leaving one spezhole and going straight to another?