Linux
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
There are a couple of things that will get in your way with this.
Bandwidth
Let's go with the bare minimum of your high end given what you want:
- running both of your displays at 4k 30Hz 8bit only will require 6.66Gbps per display
- 2.5Gbps networking is self explanatory
- assuming you only want USB 2.0 ports, 480Mbps per port
without overhead, that's ~17Gbps. USB 3.2 Gen 2 can do 10Gbps, and USB 4 can do 20-40Gbps, so it would need to be a USB 4 dock at minimum, which means new and most likely above your budget. Your low end could probably be done on USB3.2 Gen 2, but you're still going to come close to your budget or blow it.
Multiple displays
Running multiple displays from a single usb-c port is not great. you can do it with thunderbolt docks just fine, but they are all going to blow your budget. With usb-c your options are a single display per port on your machine with displayport-over-usb-c implemented, or multiple displays using multi-stream transport (MST). MST is known to be extremely finicky and generally not worth the hassle in my opinion.
Recommendation
If you need multiple displays (on top of the HDMI 2.1 port on your machine), either dedicate both usb-c ports to it and use two cheaper docks, or go all in and get a thunderbolt dock like the Caldigit TS4.
Thanks for the info! 🙂
I may jump to the Caldigit TB dock based on reccs in the comments.
$150 is the most I’m willing to spend on a USB dock. 😆 Above that, I might as well jump to a TB dock.
This was more of a cheap stop gap solution to my many cables getting plugged into the laptop problem.
There are official thinkpad usb c hubs on eBay for like £30 that seem to work better than most on my Linux p50, dual display ports, PD (though sadly pd is not supported on the p50)
Tb3 is supported on that, go with it, found one for 129 or so on Amazon. Tb3 is dramatically better than usb-c in every way, mostly because usb-c means different things to different vendors while tb3 is a genuine standard.
Edit: shit you got tb4, if you get a tb4 caldigit you're set for life but they're expensive af, love mine. They're a single cable solution for everything, 2x 4k easily, think I'm at 4k+5k and it's fine.
Awesome, thanks! The Caldigit is my holy grail dock. 🙂
I wasn’t finding much info about TB and Linux, so I was reluctant to drop that much cash for something that may not work.
Tb support on linux is arguably better than usb support.
Google boltctl to authorize the dock and you're golden, stuff just works for me, though honestly I didn't use my pcie dock on linux.
Good to know. 🙂
A dock with external PCIe might be interesting, but I don’t have any plans the require that right now. 😆
You can say a lot of shit about intel, but sometimes they do hardware support in linux very well.
The Anker 575 can drive dual 4K monitors at 60 Hz and is supported by Linux, although I’ve best luck driving one monitor with a dedicated laptop USB C port. It currently retails above $200 though.
I have a dongle I bought from Walmart that works well. It is Onn brand.
Most usb-c devices should just work
The official Thinkpad dock is what we use at work
Which model? There are several different models on the website.
The link isn’t working anymore. 😕
it's working here..? Otherwise try to copy and paste this link into a translator of your choice: https://tweakers.net/reviews/11340/10/20-usb-c-dockingstations-de-beste-basis-voor-je-thuiswerkplek-conclusie.html
That’s better. 🙂
I’d forgotten about the OWC Go dock.
I use a caldigit. Its not cheap but its worked flawless.
Awesome, thanks!
Pick up a used Thunderbolt >=3 one from EBay if your laptop supports it. I have a ThinkPad Universal Thunderbolt 4 dock that I bought used for ~$100 and it has served me very well so far.
😎 I’ve looked at those, but I wasn’t sure how well TB docks are supported by Linux. I may do some eBay hunting.
TB docks are very well supported. Depending on the DE you use, you'll need to "authorize"/allow the dock for it to get used.
DE is fairly stock Gnome. Cool, I’ve seen that in the settings. 🙂
I've been using a Plugable UD-CA1 for many years (Windows and Linux) and it works fine. Currently using it with an X1 Carbon G9. As it's quite old I don't know if it's still available but if not, I'm sure they have a newer version.The price was sub-100 if I recall.
It looks like it’s still on sale. $119 now, but close enough to $100. 🙂
This should work
https://ca.targus.com/products/usb-c-universal-dv4k-docking-station-with-100w-power-dock190usz
Works With Windows, Mac, Android, Chrome, Linux Ubuntu
Ooo… MAC cloning. That’s a good one for the TB list. 🙂
From my quick search you aren’t getting everything from under $150.
I got a USB C dock from Amazon under the name LASUNEY, but it’s not for sale any more. I’ve seen equivalent under a 15 in 1 naming that seems to exactly the same, just under a different name LIONWEI that’s around the $100 mark, 2 DP 1Gbps and many usb ports.
I believe resolution is determined by your machine’s chipset not the dock, but I could be mistaken.
Now I also found one that has 2.5Gbps networking but that’s $270 under the Plugable brand. Not a fan of the specs of that one since the power comes from a barrel Jack instead of usb c.