this post was submitted on 08 Aug 2024
10 points (100.0% liked)

bike wrench

767 readers
1 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

!bicycles@lemmy.ca

!micromobility@lemmy.world

founded 1 year ago
MODERATORS
 

I have an aluminum Brodie Revel bike that I've attached a kids seat to. Is it safe for me to mount a double kickstand like the one in the link to this bike? It doesn't have a mounting plate, and someone told me I should only attach these to steel bikes or it will break the frame. Any insight would be super appreciated!

top 5 comments
sorted by: hot top controversial new old
[–] merde@sh.itjust.works 4 points 1 month ago
[–] Anticorp@lemmy.world 3 points 1 month ago

You didn't share a link. I'm assuming you mean a center stand. It's probably fine, but you'll want to check with the manufacturer.

[–] JoMomma@lemm.ee 2 points 1 month ago

I would put at least three kickstands

[–] j4k3@lemmy.world 2 points 1 month ago

You will be an outlier oddball for putting a kickstand on a dropbar bike, but the kid's seat is odd too.

You do you, but after a quick image search, that is a bit compact of geometry to load with weight, especially extended off the back IMO

The wheelbase distance (between centers of each wheel), dictates how a bike will handle and what kinds of loads can be carried. Road race bikes have very short wheel bases. The quick way to spot the overall geometry is how close the rear wheel is to the seat tube. Here is the most extreme possible road and the classic goto long haul touring bikes:

Most people don't put a kickstand on a drop bar bike because it is just dead weight. You can easily lean the bike against stuff. The other pro trick is to use the weight of the bike and the forward pedal on top of the curb side of with the wheels on the road. The ratchet paws will only let the wheel and pedals spin one direction. You use this resistance to let the bike hold itself up against the curb.

[–] aodhsishaj@lemmy.world 1 points 1 month ago

You're only going to danage the frame if you have a child larger than the rating for the child seat/rack. You'll pull the steel bolt through the mounting plate before you damage the frame.