Ask Lemmy
A Fediverse community for open-ended, thought provoking questions
Please don't post about US Politics. If you need to do this, try !politicaldiscussion@lemmy.world
Rules: (interactive)
1) Be nice and; have fun
Doxxing, trolling, sealioning, racism, and toxicity are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them
2) All posts must end with a '?'
This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?
3) No spam
Please do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.
4) NSFW is okay, within reason
Just remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com.
NSFW comments should be restricted to posts tagged [NSFW].
5) This is not a support community.
It is not a place for 'how do I?', type questions.
If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.
Reminder: The terms of service apply here too.
Partnered Communities:
Logo design credit goes to: tubbadu
view the rest of the comments
Are you making a crossover cable or installing it for the government? Those are the only places that I know of that A is used regularly. Nearly everywhere else uses B in my experience.
Are you making the assumption I am from North America?
Every place I have worked in Australia and Europe uses green first.
Really? I wasn't sure which one I "should" use so I looked at a cable that I had laying around (probably came with a cable modem or something?) and was able to see the wire colors through the connector and it was A. So that's what I've been using when making patch cables or wiring my house.
I guess my question is what's your experience with where B is used? Mostly I'm just curious, it probably doesn't really matter for me since I only do networking work in my house.
I guess it doesn't really matter as long as you stick to one for both ends of the cable
It shouldn't actually matter. It's strictly by convention that the US (and probably North America; unclear about beyond) almost exclusively uses B. The big risk is that people will assume it's B, and the other end is B, which can cause issues when they e.g. replace a receptacle and make all of your connections crossover. But even that shouldn't matter much these days.
There's also some very limited issues switching from A to B on the same line (A in wall, B in patch cable), but this is very rare. If you saw A, it was probably either a crossover, or you live in a place that uses A.
So I learned all this almost 2 decades ago so the details may be off...
There's crossover cables, which are a-b and used if you want to connect one computer to another-the tx and rx are flipped from one side to the other, so two "client" devices (like 2 computers) don't speak and listen on the same line
There's rollover cables, which are flipped on one side, that were used to connect to the console port of a router
Aside from that, nothing about the configuration really matters except being standard. The reason they're not just in stripe-color color order is to separate the tx and rx to minimize interference
I'm pretty sure all of this became moot after hundred gigabit Ethernet became a common thing anyways - they multiplex electrical signals across each of the wires, so they have to negotiate the method or fall back to a simpler protocol from the start. I'm not sure how robust it is to randomly shuffling the order on each side individually (I wouldn't try it on hardware I wasn't willing to risk)
So really, all that matters is that it matches. And since we've been doing it a certain way for so long, doing it differently is a bad idea. A vs b makes no difference, but you could make green the split pair and it'd be identical. You could use the same arbitrary order on each side and you'd probably not notice much difference, although you might get a lot more errors from minute interference
And FWIW, I think b is the more common standard across the world... But any advantage or disadvantage probably died back when we stopped using those trunk lines with dozens of pairs split out on a punch down block that goes to a bunch of different homes