this post was submitted on 26 Dec 2023
10 points (91.7% liked)
Plex
2515 readers
2 users here now
Welcome to Plex, a community dedicated to Plex, the media server/client solution for enjoying your media!
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Might not be the best place to say this, but considering Plex relies on online authentication servers to function it might be better for you to look into Jellyfin which works fully offline.
I second this. While I love my Plex, I found out one day when my internet was gone that it's not so great when the internet is down. My plan is to keep a copy of Jellyfin on my Plex machine so if I am ever in that position again I just stop Plex and fire up Jellyfin.
I haven’t tested it, but the info text suggests that you can work around the auth issue by adding your subnet to “List of IP addresses and networks that are allowed without auth“ (found in Plex Settings > Network).
I haven’t run into a memorable problem before using Plex in spotty internet areas (while in an RV) or when moving (before internet). But I’ll probably test this setting out one of these days, just in case.
So that is when you have Managed Accounts. People in your house and subnet can access plex without having to log in. They just pop up and click on their account to watch. When the internet is out, what I noticed is that every device on the subnet was only able to select the Home Admin account, so individual selection of Managed Accounts was not available when you couldn't reach the Plex mothership for authentication. Not completely unusable, but it wasn't ideal. If OP wanted to use Managed Accounts, that's not going to be possible with no internet. But with Jellyfin, it doesn't need that to have managed accounts. I had Plex and Jellyfin running on a VM at one point, and was able to switch between the two so that I could keep both libraries up to date. I switched to a dedicated machine and haven't put Jellyfin back on, but that is another solution for OP, just have both loaded on the machine, and use whichever one is best for them at the time.
You can just skip auth on local IPs.
Not all clients work without Internet though.
Make sure you don't use bit subnet masking i. e. 192.168.1.0/24
Use 192.168.1.0/255.255.255.0 version.
Hey I’ve seen this mentioned before on other posts and have done so on my plex server as well.
But this is the first time I saw someone mention bit subnet masking. Would you mind elaborating a bit? I’m also trying to learn a bit of networking so was curious. Thanks!
you should look into IPv4 subnetting.
a brief explanation, v4 address is in
a.b.c.dformat. a, b, c and d are 8bit decimal (that means 0 to 255)to get more ip available, address is sub divided into network and host part and is called subnetting.
192.168.0.0/24=192.168.0.0/255.255.255.0=11111111.11111111.11111111.00000000that means
192.168.0is the network and the last0is for the hosts. 0 and 255 is reserved for broadcasting.Thanks for taking the time to answer. I will look into this more and get more familiar with it.
Came here to say this, Jellyfin will be a better option for you