this post was submitted on 03 Jul 2023
410 points (97.5% liked)

Memes

45731 readers
1146 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
gary_host_laptop@lemmy.ml
sexy_peach@feddit.de
cyclohexane@lemmy.ml
cypherpunks@lemmy.ml
410
I fell for that too (lemmy.ml)
submitted 1 year ago by tzutoo@lemmy.ml to c/memes@lemmy.ml
26 comments fedilink hide all child comments
 
you are viewing a single comment's thread
view the rest of the comments
[โ€“] this@sh.itjust.works 12 points 1 year ago* (last edited 1 year ago) (1 children)

As an audio engineer I can confirm that shielding is more important in a cable than whether or not it has gold plated connectors. Gold plated connectors don't really do much unless the connectors are worn down and don't make good contact in the first place, shielding actually does something for signal to noise ratio, especially for unbalanced and/or mic level(low level signal) and/or long cables. This is really only applicable for analog stuff for the most part of course.

[โ€“] ClassyHatter@lemmy.world 1 points 1 year ago

Not an audio engineer, but I had unshielded (thin) cables in my home speaker setup. If the cables were positioned correctly, everything was fine. Accidentally move them even a little, and there'd be a huge amount of noise, due to power cables going near the speaker cables. Switched to shielded (thick) cables, and there's no noise ever.