techsupport

2460 readers

26 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Software gore

Recommendations

founded 1 year ago

MODERATORS

GatoB@lemmy.world

SSD keeps going read only (lemmy.world)

submitted 1 year ago by plotting_homelab@lemmy.world to c/techsupport@lemmy.world

21 comments fedilink hide all child comments

So I own a Lenovo legion 5i laptop and I installed a brand new mushkin Vortex 2tb NVME SSD last year. But it has gone into read only about 30 times since I got it but smart reports 0 errors. I reboot my machine and boom fixed it it takes place in windows and in Linux often in the middle of my work so I can't save again. I did like to fix this issue but don't know what to do as there are no errors.

The drive is gpt and has multiple partitions of which my NTFS partition has the most problems as it sometimes requires a reboot of windows even when it worked before in Linux. But my swap and ext4 partitions also fail. In total there are 6 partitions 1 large NTFS partition, 2 large ext4, a swap partition and a bios and fat partition for tripple boot. My OS's are up to date and are windows 11, pop_os and Gentoo. My other samsung drive never has this issue. But my laptop has had a motherboard replacement and a ram replacement since I got it last year.

I hope you can guide me in the right direction. Thank you for at least reading this.

you are viewing a single comment's thread
view the rest of the comments

[–] plotting_homelab@lemmy.world 1 points 1 year ago (1 children)

O that is a good one maybe there might be more didn't think of that thx

[–] Shadow@lemmy.ca 1 points 1 year ago

If your filesystem is going read only, that's your filesystem doing it and not the disk itself. You may just have a corrupt FS that can be solved with a repair, rather than a failing drive.

Or maybe you have a failing drive, in which case IO errors in dmesg will confirm that you need to replace it.