Amateur Radio

1067 readers

5 users here now

A Lemmy Community to share links about and for amateur (ham) radio to advance the technology, and promote communication and international goodwill. This community IS NOT for CB, GMRS, MURS, FRS, etc topics unless they are related to ham radio in some way.

We won't tolerate personal insults, illegal activity, or anything contrary to good amateur practice.

If asking questions about regulations, please include your country because we recognize that, while the hobby is international, regulations often aren't.

founded 1 year ago

MODERATORS

TrojanHam@sh.itjust.works

Wire connectors ideas? (self.amateur_radio)

submitted 1 year ago by HumanPenguin to c/amateur_radio@sh.itjust.works

14 comments fedilink hide all child comments

Hi I am looking for a little connection advice.

I use a radio on my narrowboat. As such I am in the process of building a simple random wire antenna. Idea being I have a 5m mast I can raise on the boat while moored. Then run a wire to a local tree or another portable mast.

The issue I am looking for some help with. Is finding connectors so I can set up different length antenna depending on available space.

I have a large kite winding wheel to store the wire with a 9:1 unun on the end. But need to be able to set up 3 different lengths. 143-84-(36 i think) feet. To do this I need some form of connector a lot stronger the your typical bullet crimp. The wind on the towpath and movement of the boat will separate such connectos easy. As the boat rocks. But anything much larger the a bullet will not roll around the kite reel well.

I am looking for some kind on single wire electrical connector. That screws together. So I can select the best length for the enviroment I am in. Unscrew the wire at that length. Commect it to an elastic rope attached to the tree or land based mast.

If the worst comes. I'll make something myself using m2 bolts and inset standoffs. But would love to know if anyone has seen something ready made that will do this.

you are viewing a single comment's thread
view the rest of the comments

[–] HumanPenguin 1 points 1 year ago

Nods I think ill look along those lines. I have found some 3.5mm bulley connectors used for RC power. I think those with the method shown in the vid. and a plastic sleeve as suggested by another post. should create a neat windable solution.