this post was submitted on 19 Aug 2023
45 points (94.1% liked)

RetroGaming

19512 readers
221 users here now

Vintage gaming community.

Rules:

  1. Be kind.
  2. No spam or soliciting for money.
  3. No racism or other bigotry allowed.
  4. Obviously nothing illegal.

If you see these please report them.

founded 1 year ago
MODERATORS
Xylinna@lemmy.world
Tenthrow@lemmy.world
gts@lemmy.world
45
Soldering Iron options (discuss.tchncs.de)
submitted 1 year ago by BitterSweet@discuss.tchncs.de to c/retrogaming@lemmy.world
27 comments fedilink hide all child comments
 

Please drop some links for the soldering irons y’all use, mine is apparently lost in my parent’s attic, and thinking of, probably too large for console modding.

I figured to ask here as I believe the console modding community here would already have some good finds. I’m also wanting todo a battery mod to my GBC soon.

you are viewing a single comment's thread
view the rest of the comments
[–] BartsBigBugBag@lemmy.tf 2 points 1 year ago* (last edited 1 year ago)

I have the FM-203, and I believe it uses the same tips as the 888D for the standard pencil, right? If so, I can vouch that it’s a good system. I bought about 10 high end tips with it when I bought it 6 or 7 years ago, and I’ve only ever had to replace one. It pushes enough heat for everything I’ve tried, even HDMI port ground pin desoldering when combined with a low melt solder.

I also use the Metcal MX-500P, and other than a quick and easy RMA process a couple years into owning it, it’s even better than the Hakko for smaller soldering, because the induction heating ensures solid heating all the way to the tip. It’s not really necessary for most hobby soldering, but very worth it if you do a lot of microsoldering.