skariko

joined 4 years ago
sorted by: new top controversial old
My instance increases by 1GB per day in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 2 points 1 year ago (1 children)

Yes I had considered that, but considering that ours is not a giant but moderate instance (a thousand subscribers) it seemed exaggerated to get to have 1GB occupied every day.

My instance increases by 1GB per day in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 15 points 1 year ago* (last edited 1 year ago)

well, indeed it could be just that. I just checked and it's size is 15GB ๐Ÿ˜ฑ

63
My instance increases by 1GB per day (lemmy.ml)
submitted 1 year ago* (last edited 1 year ago) by skariko@lemmy.ml to c/lemmy_support@lemmy.ml
27 comments fedilink
 

hello, on my server on which only Lemmy is running, I don't understand why it fills up space all the time. Every day it increases by about 1GB thus risking reaching the limit after a short time.

It is not the images' fault because there is a size limit for uploading and they are also transformed into .webp.

The docker-compose file is the one from Ansible 0.18.2 with the limits for loggin already in it (max-size 50m, max-file 4).

What could it be? Is there anything in particular that I can check?

Thanks!

28% - 40G (3 July)
29% - 42G (4 July)
30% - 43G (5 July)
31% - 44G (6 July)
36% - 51G (10 July)
37% - 52G (11 July)
37% - 53G (12 July)
39% - 55G (13 July)
39% - 56G (14 July)
[BOT] RSS to Lemmy community? in c/lemmy@lemmy.ml
[โ€“] skariko@lemmy.ml 2 points 1 year ago (1 children)

Thanks, will try it ๐Ÿ‘

7
[BOT] RSS to Lemmy community? (lemmy.ml)
 

hello, does anyone know if there is a bot to automatically post to certain Lemmy communities from an RSS feed?

I found this: https://github.com/Ategon/Lemmy-Mega-Bot but it says it is not compatible with Lemmy's new API.

Sending email problem in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 2 points 1 year ago

My problem was that the Hetzner server was new and therefore certain ports were closed. I solved it by contacting Hetzner support and having them open the ports.

Error when upgrade to 0.18 in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 1 points 1 year ago* (last edited 1 year ago)

It seems to have been resolved: the problem was the private instance setting, as soon as I edited in the database and it worked again ๐Ÿ™ˆ

Error when upgrade to 0.18 in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 1 points 1 year ago (1 children)

I actually only used Ansible for the first installation, all subsequent ones I manually updated only the docker file and following the various instructions that were given only in this update it didn't work.

If it helps I can post my current configuration file docker-compose.yml

4
Error when upgrade to 0.18 (lemmy.ml)
submitted 1 year ago* (last edited 1 year ago) by skariko@lemmy.ml to c/lemmy_support@lemmy.ml
4 comments fedilink
 

hi, I installed a year ago lemmy via Ansible, then all the upgrades I always did by changing only the docker-compose.yml file.

Today I tried to upgrade from version 0.17.4 to 0.18 by changing the docker-compose.yml file but the site doesn't work.

The only error I have is:

Starting http server at 0.0.0.0:8536
lemmy_1 | the thread 'actix-rt|system:0|arbiter:0' panicked for 'No auth header for picture access', crates/routes/src/images.rs:138:8
lemmy_1 | note: run with environment variable `RUST_BACKTRACE=1` to display a backtrace
lemmy_1 | thread 'actix-rt|system:0|arbiter:0' panicking about 'No auth header for picture access', crates/routes/src/images.rs:138:8
lemmy_1 | thread 'actix-rt|system:0|arbiter:0' panicking over 'No auth header for picture access', crates/routes/src/images.rs:138:8

Thanks.

Upgrade error in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 1 points 2 years ago

Found out just now what the problem was.

I am writing this to help others: the federation was active in that instance but it was also marked as a private instance. This gave no problems in using it until the update (probably because it is restarted and re-run Docker).

I removed the federation from the config file leaving only the private instance and it restarted immediately.

0
Upgrade error (lemmy.ml)
submitted 2 years ago* (last edited 2 years ago) by skariko@lemmy.ml to c/lemmy_support@lemmy.ml
1 comments fedilink
 

Hello, I am trying to update from 0.16.3 to 0.16.5 with Ansible.

It is on my test instance, i use this:

git pull

and

ansible-playbook -vvv -u MYUSERNAME -k -K -i inventory/hosts lemmy.yml --become

It does everything with no error but when I try to visit the website i receive:

404: FetchError: request to http://lemmy:8536/api/v3/site? failed, reason: getaddrinfo EAI_AGAIN lemmy

Could the problem be that I am using the backend (on different folders) multiple instances of lemmy?

Sending email problem in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 1 points 2 years ago (2 children)

I have answered and find the solution here: https://lemmy.ml/post/258218/comment/176759

Thanks for the help!

Sending email problem in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 1 points 2 years ago (4 children)

yes, actually i tried 'none', 'tls' and 'starttls' but with no success. I tried with external SMTP because the default created by ansible does not work:

  email: {
    smtp_server: "postfix:25"
    smtp_from_address: "noreply@mydomain.it"
    tls_type: "none"
  }
Sending email problem in c/lemmy_support@lemmy.ml
[โ€“] skariko@lemmy.ml 2 points 2 years ago* (last edited 2 years ago) (6 children)

It is the same thing that I thought. Unfortunately, if I try to manually force the port by writing smtps.aruba.it:465 as I said the server freezes for several minutes, goes to 504 and does not send any email.

So I can not understand if the port must be entered in another way (?) or if I have to install something on the server first to be able to send an email through an external SMTP as in this case?

11
Sending email problem (lemmy.ml)
 

Hello! I managed to set up an instance quite easily with Ansible, only problem now is that I can't send emails in any way!

If I leave the default configuration (postfix: 25) and try to ask for a password reset, it tells me it sent it but nothing really comes.

I then thought of using an external SMTP, since I have it available together with the domain.

If I put: "smtps.aruba.it" then adding smtp_login and smtp_password when I try to send an email I get an error with only written: "465".

If I add the port to the SMTP server like this: "smtps.aruba.it:465" and also adding in "tls_type: tls" the server freezes for 5 minutes, does not send anything and I do not receive any errors.

I'm definitely doing something wrong but what? Where can I look?

Thanks!

1
Can't use RSS? (lemmy.ml)
 

Hello everyone!

I am trying to add a community RSS to my RSS reader but it always give me error, on any RSS reader!

Like this: https://lemmy.ml/feeds/c/asklemmy.xml?sort=Active it can't be added to my RSS reader :(

What am I doing wrong? Is there another RSS link?

Thanks!