steel wool socks keep the toenails in check
akacastor
joined 1 year ago
When making PCBs with the toner transfer method, I've used photo paper intended for inkjet printers and printed (mirrored) on it with a laser printer. Then iron the paper (printed side down) onto the PCB. Some pressure is needed but not TOO much or fine traces will squish together. Soak the board with paper stuck to it in water and then the paper can be peeled off, leaving the toner transferred to the copper. Bits of stuck paper can be removed with gentle rubbing in the water with fingers or a soft toothbrush.
If the toner did not transfer well, it can easily be removed by cleaning with acetone, then repeat until successful. Key to getting a good toner transfer is to completely clean the copper first. I scrub with a scotchbrite pad and then clean with acetone and a paper towel, until completely clean and then don't touch the copper with your fingers (greasy greasy fingerprints). Any oils or dirt will make the toner not stick. Some paper is easier to remove from the copper after ironing on - there was a specific Staples SKU (inkjet photo paper in a red box) that I remember being particularly good. I believe the inkjet paper allowed the toner to transfer and release more cleanly, with less pressure and heat required. I also found I got a nice result using the same toner transfer method onto a block of wood (purely aesthetic, not part of a circuit haha).
Some people would use laminator machines to "iron" the toner onto the copper board - I have never tried it that way, but I guess if you get the pressure and heat dialed in it could be pretty consistent. I've had good success using an iron by hand, after a few tries to find good temperature and pressure to apply.
I've also milled PCBs, there are some benefits to milling, like you can drill holes at the same time. I think 2 sided PCBs are easier to mill than to etch. The limitation of milled (and etched at home) PCBs that I find most annoying is the lack of through-plated holes. This means you have to solder in wires, and solder to both sides of the board, for every via - it really adds some design limits and assembly time. Solder mask is another (optional) step, most people I know who make their own PCBs don't bother to use solder mask but it is available as UV-curable liquid.
Ordering PCBs is incredibly inexpensive these days. Oshpark is in the USA and a great place to get PCBs. There are places in China you can order from online like PCBway, I just priced out 5 PCBs of 100mm x 100mm, 2 layers, green solder mask, $5 + $20 shipping to Canada, delivery within a week.
Checking at a local hackerspace/makerspace is a great idea too, often there's people around who are making their own PCBs (or at least have in the past).
I've both etched (using the laser printer toner transfer method) and milled PCBs for through hole and surface mount parts, it was no problem etching a board for a TQFP 100 pin part (0.5mm pin spacing). I didn't push it further than that.
Whippletree Junction, off the Trans Canada Highway south of Duncan.
Great detective work! :) I looked briefly at the list of names but somehow ignored most of them. I was looking all over for the liquor store, and of course it's Days Inn on the Harbour.
The teal door in a church-like building is First Memorial Funeral Services in Duncan - I had trouble identifying it also (though it had that familiar look), then on a rewatch of the video there's a moment where they show enough of the building to include the sign.
There's also another similar coloured door + building (with coloured posts on either side of the door), the building looks more house-like than church-like. It looks like it could fit in at Whippletree Junction, but I haven't identified it as a specific building and that may not be the location at all.
The store with the large "LIQUOR, COLD BEER & WINE SHOP" sign looks so familiar but I haven't been able to locate it yet.
A photo I took April 2, 2024 at Cherry Point Beach, with the beached boat:
The boat had already been there for a few weeks by then, I don't recall exactly when it was beached.
Went to The Brazen Fork for lunch Saturday.
They hadn't seen the video yet, though they definitely recognized what I was talking about as soon as I mentioned it. They had to write down the name so they could look it up! :)
Thanks for calling the BBS, it's great finding and talking to so many other people who enjoy this!
Fantastic! As soon as I saw the first photo I thought "what a wonderful play room!" and also I want to play in all the rest too. :)
Where is this? What is this?
Beautiful desk and equipment!
Thanks for checking it out! It's great being part of the BBS community again. So many bits to tinker with.
------------------------
Another Millennium BBS
------------------------
* * * * * * * * * * *
* GRAND OPENING * (still open
* April 20, 2024 * other days!)
* * * * * * * * * * *
Canada: +1.587.67.31337
USA: +1.949.59.31337
telnet: another.tel
Running Maximus BBS software in MS-DOS for an authentic 90s BBS experience, with local and fsxNet message areas, file areas, and door games.
USRstats, "modem stats" option on the main menu, provides information about your dialup modem connection to the BBS including baud rate and protocol information, error count, etc.
Buccaneer door game - roam the sea, loot treasure ships, but beware the Spanish Armada! Players active daily.
Astronomy Picture of the Day SIXEL format graphics in supporting terminals. (SyncTerm recommended)
AP Class World HQ - hand-crafted artisinal cracks and keygens for special nearly-lost wares.
Fast new user signup, real names not required.
There's never been a better time to call a BBS! Check out a few of our own favourites in the "List of BBSes" at the main menu.
=======================
Another Millennium BBS
=======================
Canada: +1.587.67.31337
USA: +1.949.59.31337
telnet: another.tel
=======================
Hope to see you online!
Chris / akacastor (SysOp, Another Millennium BBS)
For anyone interested in seeing SuperBBS - there is a BBS 'The Lower Planes' at tlp.zapto.org (BBS on port 6502) that claims to be the only SuperBBS in the world.
The window sill has plenty of space and is a cozy spot, directly above the baseboard heater in the space behind the couch. This is one of her favourite spots.
cross-posted from: https://lemmy.world/post/6135073
Photo of a sea lion enjoying the sun on a dock in the marina at Cowichan Bay, Vancouver Island.
Sea lions visit Cowichan Bay in the fall to feast on salmon on their way to migrate upstream. It is early in the season, many more sea lions will arrive this month. Read more here.
cross-posted from: https://lemmy.world/post/6135073
Photo of a sea lion enjoying the sun on a dock in the marina at Cowichan Bay, Vancouver Island.
Sea lions visit Cowichan Bay in the fall to feast on salmon on their way to migrate upstream. It is early in the season, many more sea lions will arrive this month. Read more here.
cross-posted from: https://lemmy.world/post/6135073
Photo of a sea lion enjoying the sun on a dock in the marina at Cowichan Bay, Vancouver Island.
Sea lions visit Cowichan Bay in the fall to feast on salmon on their way to migrate upstream. It is early in the season, many more sea lions will arrive this month. Read more here.
Photo of a sea lion enjoying the sun on a dock in the marina at Cowichan Bay, Vancouver Island.
Sea lions visit Cowichan Bay in the fall to feast on salmon on their way to migrate upstream. It is early in the season, many more sea lions will arrive this month. Read more here.
cross-posted from: https://lemmy.world/post/5560795
Aboard BC Ferries vessel Coastal Celebration travelling from Tsawassen (Vancouver) to Swartz Bay (Victoria), September 21 2023.
view more: next ›
For my Samsung 85" TV, entering the wifi password was a requirement - without wifi access, several weeks after installation, the TV stopped displaying video from any input. The only solution was to enter the wifi password, at which point the TV immediately returned to normal operation.
Just because it appears to be optional to connect the device to internet does not mean the basic functionality will work.