this post was submitted on 12 Jun 2023
23 points (100.0% liked)
Technology
37746 readers
561 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
It's fairly safe to just do it yourself. Simply be aware you don't have to force anything too much. Pushing the ram into the slots is likely the most force you need. Even if you get something wrong as long as you didn't apply to much force and break some pins you can just reseat it and try again.
CPU is the one you're most likely to mess up but that takes virtually no force at all. If you're using basically any force, stop and turn it because you clearly don't have it lined up correctly. They should drop in and then lock into place.
If building it is of interest to someone I think anyone can do it. If you don't know, just stop a check a youtube video but these days it's fairly easy to do and virtually impossible to plug anything into the wrong spot.