homelab

6460 readers

2 users here now

founded 4 years ago

MODERATORS

Banana Pi BPI-M7 router board now available for $165 (RK3588 processor, dual 2.5 Gb Ethernet, WiFi 6 and BT 5.2) (liliputing.com)

submitted 7 months ago by sabreW4K3@lemmy.tf to c/homelab@lemmy.ml

30 comments fedilink hide all child comments

Does this look like a decent starting point for a first router build?

Cross posted from: https://lemux.minnix.dev/post/204890

you are viewing a single comment's thread
view the rest of the comments

[–] ikidd@lemmy.world 2 points 7 months ago

Proxmox will report SMART errors via email if you set that up. You could also run a system like Nagios to run the checks via another box. I actually run Home Assistant with the Proxmox HACS extension to monitor it. It's on a VM so that isnt' ideal, so I also run Node Red on the little I5 PBS box to send alerts if it can't contact Proxmox itself now. The node going down without me realizing it was a bit of a wakeup call, though it failed my docker host and router over so seamlessly it was astounding.

I have nothing between the router and the modem except a switch so each Proxmox node can have a NIC on the external network and failover/migrating can pick up the modem and use it. I suppose I could VLAN, but the servers have 2 network ports anyway so that works fine.