this post was submitted on 27 Jan 2024
12 points (87.5% liked)

homeassistant

12118 readers
50 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
GreatAlbatross
12
Resetting Timers (lemmy.tf)
submitted 10 months ago by sabreW4K3@lemmy.tf to c/homeassistant@lemmy.world
30 comments fedilink hide all child comments
 

I have a bunch of presence and motion sensors (like four, but shush) and when people leave rooms I would like to turn the lights off after five minutes, however if someone returns to the room before that five minutes is up, I'd like to start that countdown again. Is there a grateful way to do this that isn't me just doing if no activity for five minutes, turn off the lights, else wait five minutes and then turn off the lights. Because that's ugly, rigid and not very smart at all.

you are viewing a single comment's thread
view the rest of the comments
[–] solidgrue@lemmy.world 10 points 10 months ago (2 children)

You should be able to handle this in HA within a single automation:

Trigger: Room is occupied (occupancy > 0)
Condition: Light off
Action:

  • Call service: Turn Light On
  • Wait for Trigger: Room is clear for 5 minutes (occupancy < 1)
  • Call service: Turn Light Off

If you are basing your occupancy on more than one sensor state, you could build a helper to combine the states into a single sensor value, which itself might need a Hysteresis helper.

I've started moving some of my own automations over to this method. It works pretty well, but it is susceptible to being interrupted by restarts or reboots. You may need to build in additional logic to reset things to a known state on startup.

[–] DrM@feddit.de 4 points 10 months ago (2 children)

It's also important to set the mode of the automation to "restart", then it works flawlessly

[–] solidgrue@lemmy.world 2 points 10 months ago (1 children)

Aha! THAT'S what that does. Thank YOU too!

[–] DrM@feddit.de 2 points 10 months ago (1 children)

I don't want to set a misunderstanding: this does not solve the state on reboot issue, maybe "flawlessly" is not the correct word. On a reboot, all automations are always stopped, so that does not help here.

[–] solidgrue@lemmy.world 1 points 10 months ago

No, no. I do sometimes have to contend with race conditions and reentrant triggers. I never considered looking into whether it was possible to change the execution mode, even if I did read that documentation without understanding what it meant.

Thanks for the pointer back to it. Now I grok it.

[–] sabreW4K3@lemmy.tf 1 points 10 months ago (1 children)

What do you mean? Is that different than repeat until?

[–] sabreW4K3@lemmy.tf 4 points 10 months ago* (last edited 10 months ago) (1 children)

Bloody hell! So I saw this and it was like my vision cleared! I'm actually lost for words, but thank you. I don't know why I didn't realise what wait for trigger did, but holy fuck, you're beautiful, thank you so much!