this post was submitted on 28 Oct 2023
230 points (96.7% liked)

Asklemmy

43963 readers
2328 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy ๐Ÿ”

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS
 

This question was inspired by my hatred of Temporal Anti-Aliasing which, in many games nowadays, is poorly used as a performance bandaid. On lower resolutions it will smudge and blur the image and certain bad cases of TAA will cause visible ghosting.

Yet in spite of all this, certain games won't let you turn it off or have hair/fur/foliage look like dogshit without it so sometimes I still use it.

you are viewing a single comment's thread
view the rest of the comments
[โ€“] thagomizer_@infosec.pub 5 points 1 year ago* (last edited 1 year ago) (1 children)

its really not too painful to set up, and once you set it up, the only thing you'll ever have to do with it is possibly turn it off and turn it back on again by pushing a power button or unplugging and replugging the modem/router back in.

Here is what a basic setup looks like:

  • Buy a DOCSIS 3.0+ capable modem. Something like an Arris Surfboard will work swimmingly. This will set you back ~$100
  • Buy a wifi router that is capable of gigabit speeds. Something like TPLink Archer A7 should work for a basic set up. This is ~$50.
  • Plug in an ethernet cable from the modem to the WAN port of the router. On TPLink routers this port is usually blue.
  • take the coaxial cable out of the ISP provided router/modem, connect it to the modem you purchased
  • take a note of the Serial Number/MAC Address/Other details on the sticker on your modem.
  • take a note of the WiFi SSID and password on the sticker of the router. this will be your new wifi info to connect to
  • make sure everything is plugged into power and on
  • connect to the wifi with a laptop or desktop or plug an ethernet cable into one of the other ports of the router. the internet will NOT work at this point. This is expected.
  • call the cable company and tell them that you have your own modem and that you want them to activate it. They'll probably ask you for some of the details on the bottom of the modem. Ensure that they get all of this info correct or it wont work
  • once the cable company activates the modem, they may tell you that it will take 30 minutes to activate. Wait the time and then test the internet connection on your device. The internet should theoretically work at this point

If you run into issues one thing you can do to troubleshoot is take the ethernet cable that is coming from the modem to the router and unplug the router side and plug it straight into your laptop or desktop(disclaimer its not safe to browse the internet normally like this, just go straight to google and do a search for banana, no need to click on anything else, if it works it works, if it doesnt then still no internet). If the internet didn't work before on wifi or ethernet coming out of the router and it works now, then you know the modem is working and that the router is potentially having problems.

Although it might be a slight pain to set up once, if you are renting the modem for $10/month then dealing with this hassle once will be an investment that will pay itself off in a bit over a year. This is approximately 1 full afternoons worth of work for a novice if I was to guess. Feel free to reply back to this thread later if you get stuck

Saving post for later. Thank you for writing that up!