ErgoMechKeyboards

5771 readers

6 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS

Does anyone have ideas about a possible battery placement on this board? (lemmy.ml)

submitted 11 months ago* (last edited 11 months ago) by tarneo@lemmy.ml to c/ergomechkeyboards@lemmy.world

8 comments fedilink hide all child comments

Basically title.

Because I live in Paris, it would be nice to buy batteries in store. The most promising model I found is a 180mAh 32x17x4mm lipo.

I could also theoretically use one of these li-ion cylindrical batteries, but they are longer than the keyboard's size (which is 77mm).

Here's what I already tried:

removing the inner thumb key, which makes the keyboard 34-key and leaves enough space for the battery mentioned above. Though after a few hours of using home row mods on my current keyboard I don't think that will be a good solution.
moving the MCU (Seeed XIAO BLE) to the right, which makes the board 2cm wider (and doesn't look very good since I have no keys there). This one isn't very elegant, plus I don't really want to make the board wider, and I'd like to avoid it even though it is a solution.

Please ignore the mounting holes and TRRS jacks, I am still unsure about whether or not I want to just ditch bluetooth and make this board wired (which works with kmk)

The ergogen config is available on the github repo.

you are viewing a single comment's thread
view the rest of the comments

[–] nezbyte@lemmy.world 8 points 11 months ago (1 children)

A printed case with about 30 degrees of tenting would provide a good bit of space under one side of the board. I did that with a Sofle RGB so I could fit a full PlayStation controller battery under it.

[–] tarneo@lemmy.ml 2 points 11 months ago

Yeah, at first it seemed quite alright to do with a smaller angle (from 3 to 6 degrees depending on the battery), but now I think it would make the board too complicated. Right now I am trying to get used to sticky mod keys on home row combos (colemak A+S for LGUI, N+I for LCTL) and it seems like I'll be able to remove the inner thumb key in the end.