3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I dont have any model to recommend, but keep in mind that you might also need curing and cleaning station, proper ventilation, mask, gloves etc.
Thank you. I'll definitely be getting those things too. Another reason why a multi-thousand dollar printer is too expensive
Even with moderate usage, no joke, I'd recommend getting a flammables cabinet to store IPA. At the end of every weekend, I drain our washing station back into two three liter jugs and put them in the flammables cabinet. I drain them while the washer is running to get the solid stuff out of the washer. They're stored correctly, the cabinet prevents light from reaching the jugs, and the solids settle to the bottom of the jugs over the weekend. On Monday I carefully pour the top portion into the auto washer and top it off with new IPA. The settled layer gets poured into the waste container.
We have two printers at work, one wash station and one cure station. And we have 8x jugs of IPA in our flammables cabinet.
Before we started settling in the cabinet and decanting our wash solution, we went through an incredible amount of IPA that we had to deal with as waste. And this is from two SLA printers, which we use in addition to our Prusa MK3 and SLS nylon printers, so we don't always use the resin printers.