this post was submitted on 15 Sep 2024
31 points (87.8% liked)

homeassistant

12154 readers
95 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
GreatAlbatross
31
What device can rotate a knob and works with HA? (feddit.it)
submitted 2 months ago by Moonrise2473@feddit.it to c/homeassistant@lemmy.world
39 comments fedilink hide all child comments
 

I was accidentally locked out of home again, and I had to call a professional to open the lock.

But if someone was home, they could have just turned the knob of the door from inside. There's a device that can do that? It needs to do 3 full turns and it requires a bit of force to do that (armored door with iron bars that slide in every direction, so it has a big inertia to start)

I saw a ready solution on a store, the iseo x1r, but that costs 1000 euro + another 200 for the gateway (not mandatory but otherwise it uses proprietary Bluetooth protocol and so it can't talk with HA

you are viewing a single comment's thread
view the rest of the comments
[โ€“] AbidingOhmsLaw@lemmy.ml 1 points 2 months ago* (last edited 2 months ago) (1 children)

Depends on the lock being actuated and the torque of the servo, I have some that can do 4.4 N-m.

https://www.amazon.com/high-torque-servo/s?k=high+torque+servo

A stepper motor would also work for sure.

[โ€“] Prunebutt@slrpnk.net 1 points 2 months ago

TIL about high torque servos.