Linux

48315 readers

972 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
No misinformation
No NSFW content
No hate speech, bigotry, etc

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

nooter692@lemmy.ml

MarcellusDrum@lemmy.ml

cypherpunks@lemmy.ml

cyclohexane@lemmy.ml

d3Xt3r@lemmy.nz

Handling USB-attached Hard Drives. Am I doing it wrong? (lemmy.one)

submitted 1 year ago by waspentalive@lemmy.one to c/linux@lemmy.ml

7 comments fedilink hide all child comments

I have a stack of SATA hard drives that I need to erase.

I have a USB drive dock, a box that a drive can be set into that connects to my computer via USB-3.

I am using DD to write zeros to the raw device, in this case, /dev/sdf.

No matter the actual size of the drive dd stops at about 3 to 7 gb. These are 300 gb to 3 TB drives.

I am not mounting the drives, but I do ensure they are visible to the system with lsblk. To change drives I turn off the dock. The drive then disappears from lsblk. When I insert a different drive and turn the dock back on again /dev/sdf re-appears.

Are all my drives bad? If they are I will need to have them "professionally" destroyed at about $25 a drive.

you are viewing a single comment's thread
view the rest of the comments

[–] ono@lemmy.ca 2 points 1 year ago* (last edited 1 year ago)

I prefer shred for erasing magnetic drives. dd can work too, but its options are arcane enough that it's easy to make mistakes that lead to weird behavior.

If that doesn't fix the unexpected size problem, I would suspect the USB bridge in your dock. Those things are notoriously buggy.

Connecting directly with SATA is a more reliable approach. It also lets you use hdparm to tell the drive to run a secure erase cycle on itself.